Performance - Golf MK8 All Models

REAR BODY BRACE Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES IT DO? Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why the Clubsport S Golf gets a factory rear brace.  The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify. PRACTICAL Compatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points. LIGHTWEIGHT A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars. ADJUSTABLE Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car. Confirmed Fitment Golf Mk7 Hatch Golf Mk7.5 Hatch Golf Mk7 Estate Golf Mk7.5 Estate  

Read more less

Racingline Sport Lowering Springs VW Golf Mk8 R (Hatch) – VWR31G80R Lowering Range:* 20mm Front and Rear Racingline lowering springs are the perfect first addition to your Mk7 Golf R. If you use your car on a daily basis and are only looking to uprate one aspect of your car, you can’t do better than our VWR Sport Springs. They replace the car’s four standard springs with re-engineered, different-rate and slightly shorter Sport Springs. The vehicle’s center of gravity is lowered, reducing body roll for better dynamics, whilst maintaining the ride quality and comfort of your car. Meanwhile, the car’s appearance is transformed. By getting rid of those nasty wheelarch gaps, it’ll look like it always should’ve from the factory! Compatibility VW Golf 8 R 2021+ (Hatchback models only) Perfect Performance. Many experts consider suspension development to be as much an art as a science. In truth, it’s a bit of both. Go lower or stiffer than our springs and your car will bounce and crash as the dampers are mismatched to spring-rate, and the springs themselves run out of travel. Our progressive-rate spring construction means the spring rate in the middle of travel is very similar to standard. It’s only towards the end of the spring’s travel (so, when braking or cornering hard) that we have engineered the spring to stiffen up. It’s this progressive-rate spring design that gives such good ride quality. Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR31G80R

Read more less

Racingline Adjustable Rear Droplinks MQB/MQB Evo – VWR520000 Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier. Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. Vehicle FItment – VW Golf Mk8 2020+– VW Golf Mk7 & Mk77.5 2013-2020– VW Passat B8 2015+– VW Arteon 2017+– VW T-Roc 2017+– VW Tiguan II 2016+– Audi S3 8Y 2020+– Audi A3 8Y 2020+– Audi S3 8V 2013-2020– Audi A3 8V 2013-2020– Audi RS3 2.5 TSI 8V 2017-2020– Audi TT 3 8S 2014+– Audi TTRS 8S 2017+– Audi SQ2 2018+– Audi RSQ3 F3 2019+– Audi Q3 2019+– Audi Q2 2017+– Cupra Leon IV FW 2020+– SEAT Leon III 5F 2015-2020– Cupra Ateca 2018+– Cupra Formentor 2020+– SEAT Tarraco 2018+– Skoda Octavia IV NX 2020+– Skoda Octavia III 5E 2014-2020– Skoda Superb III 3V 2015+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR520000

Read more less

PFF85-833 PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-833P PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-833BLK PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

LOWER ENGINE MOUNT (LARGE) INSERT DIESEL PFF85-832R Some NVH transmission should be expected when fitting this part to a Diesel vehicle. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT TRACK USE PFF85-832P Made in Purple 80A and suitable for higher powered cars and track cars, this part helps to further reduce engine movement over fitting the standard PFF85-832 insert. Increased NVH may be felt when fitted. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832BLK   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)                    

Read more less

FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - ROAD PFF85-831 PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-831P PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-831BLK PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- fits: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

LOWER ENGINE MOUNT INSERT (LARGE) DIESEL PFF85-830R Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) TRACK USE PFF85-830P Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830BLK   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

FRONT WISHBONE FRONT BUSH PFF85-501 For a camber adjustable bush use PFF85-501G. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH PFF85-501BLK   OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501G This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501GBLK This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FITS: Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U, Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

FRONT WISHBONE REAR BUSH, CASTER ADJUSTABLE PFF3-902G Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. OEM Part Number: Bush = 8S0407183B / 81A407183 / 5Q0407183L OEM Part Number: Arm = 8S0407151B / 81A407151C OEM Part Number: Arm = 8S0407151D / 81A407152C --- FRONT WISHBONE REAR BUSH, CASTER ADJUSTABLE PFF3-902GBLK Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. OEM Part Number: Bush = 8S0407183B / 81A407183 / 5Q0407183L OEM Part Number: Arm = 8S0407151B / 81A407151C OEM Part Number: Arm = 8S0407151D / 81A407152C --- FITS: Audi A1 GB (2018-on), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020),  Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on),  Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Seat Ibiza Mk5 KJ1 (2017 - ), Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam,  Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Volkswagen Passat B8 (2013 on), Volkswagen Polo MK6 AW Inc. GTI (2018 - ), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Arteon (2017 on), Volkswagen T-Cross (2018 - On)

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment.  Now it is possibile to easily setup and maintain desired camber on your track car. For that reason we have come up with inserts for wheel bearing housing and rear lower wishbone that the spring sits on. Our inserts use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS. Product functionalities:– no rubber to bend, you will not loose the geometry while cornering that was set when doing aliment Features:– CNC machined form 7075 aluminium and anodized in black and silver– M18 and M16 uniball– metal bushings galvanized in black What is included:– four inserts (this is a kit for one car) Used in  cars (type numbers in brackets): 2013 +  Audi A3/S3/RS3 (8V & 8VFL MQB) 2013 +  Audi A3 (8V & 8VFL MQB) 2015 +  Audi TT/ TTS /TTRS (8S MQB) 2013 + Volkswagen Golf/GTI (Mk7 MQB + Mk8) 2013 + Volkswagen Golf/GTI/R (MkVII MQB) 2012 + Seat Leon (5F MQB) 2017 + Audi Q2 (quattro) Replaces:– 1K0505553A / 1K0 505 553A – uprights bush– 5Q0505553 / 5Q0 505 553 – inner bush Note: Installation of this rear insert kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.

Read more less

AG MQB Lightweight Alloy Lower Front Control Arm Kit SuperPro's lightweight alloy front control arm kits deliver more caster, camber and eliminate unwanted flex.Exclusive to SuperPro, their alloy arms feature DuroBall rear bushings which are spherical joints embedded in the firm's unique Polyurethane for incredible control without introducing noise, vibration or harshness.These arms are the best upgrade available. Caster and camber increase gives more steering weight and feel as well as more fun.ALOY0018K offers a 38% weight saving over the OE arms, increased strength, increased caster, increased camber and much longer service life than the standard factory arms...and they look incredible too!SuperPro Tip:Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact.We also offer standard alignment steel front control arms (TRC1070-MOD) for the same MQB-chassis vehicles which, although they are heavier and don't feature caster increase bushes / anti-lift, they do have upgraded SuperPro bushes so will be a long-lasting simple upgrade. Kit Includes: 2 x Arms Shipping Weight: 7.7250kg Stock Details: Country of Origin: AUEAN: 9317745781158 Suitable for: Audi A3 MK3 8V1 3-Door Hatchback Front Wheel Drive (2012 to 2016) Audi A3 MK3 8VA 5-Door Sportback Front Wheel Drive (2012 to 2016) Audi A3 MK3 8V1 3-Door Hatchback quattro (2012 to 2020) Audi A3 MK3 8VA 5-Door Sportback quattro (2012 to 2020) Audi A3 MK3 8VS Saloon / Limousine Front Wheel Drive (2013 and later) Audi A3 MK3 8VS Saloon / Limousine quattro (2013 and later) Audi A3 MK3 8V7 Cabriolet Front Wheel Drive (2013 to 2019) Audi A3 MK3 8V7 Cabriolet quattro (2014 to 2019) Seat Leon MK3 Front Wheel Drive (2012 and later) Skoda Karoq NU7 Front Wheel Drive (2017 and later) Skoda Octavia MK3 All-wheel Drive (2012 and later) Skoda Octavia MK3 Front Wheel Drive (2012 to 2016) Volkswagen Caddy MK3 Typ 2K Second Facelift Front Wheel Drive (2015 to 2021) Volkswagen Golf MK7 4MOTION (2012 to 2019) Volkswagen Golf MK7 Front Wheel Drive (2012 to 2019) Volkswagen Golf MK8 Front Wheel Drive (2019 and later) Volkswagen Golf MK8 4MOTION (2020 and later) Volkswagen Golf Alltrack BA5 All-wheel Drive (2014 to 2020) Volkswagen Tiguan AD Front Wheel Drive (2016 and later) Volkswagen Tiguan AD 4MOTION (2016 to 2020) Volkswagen T-ROC A11 4MOTION (2017 and later) Volkswagen T-ROC A11 Front Wheel Drive (2017 and later)

Read more less