![Ford Focus MK1](http://www.carenhancementsuk.co.uk/cdn/shop/collections/comingsdoon_c80f0b9d-738b-4a70-8cc8-c2d31031fec1.png?v=1486402302&width=640)
Ford Focus MK1
#ENHANCED EDITION 382 BRAKE LIGHT / FOG LIGHT UNIT
Upgrade your single filament Brake / Fog Bulb With a brand new design, using lower powered led's with a higher lumen output, you can be sure that this is a fantastic upgrade for your vehicle! Consisting of 24 High powered LED's around the side, and 6 high power projection leds on the end these bulbs give a fantastic projection. We give you, the #Enhanced Edition 382 LED Unit Canbus Error Free on 99% of Vehicles 382 P21WBA15S Please note this will not work on Dual Filament bulbs (1 bulb that does 2 functions EG stop tail) Price is per pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£14.00 - £28.00
#Enhanced Edition 501A LED Mirror Indicator/Side Repeater
Description #Enhanced Edition 501A LED Mirror Indicator / Side Repeater Bulb - Canbus Friendly To work as part of a set with our Enhanced Edition 581 Indicator Unit These LED Indicator Bulbs produce a bright orange light as well as enhancing the overall look of the vehicle by producing a strong light output of upto 7x as bright. With 52 LED's PER BULB These are sure to Enhance Your ride! Whats in The box? 2x 501A LED Side Repeater Bulbs Specification: 501A Fitment Long Lasting LED's Ultra Bright all round light output Canbus error free Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£11.88£9.90
#Enhanced Edition Footwell Kit (Front & Rear)
General Info Enhance your interior with our front and rear footwell upgrade kit. Ultra bright front and rear foot wells that behave exactly the same as your oem fronts, but brighter! Pick from one of 6 colours and choose your vehicle to ensure you get the right kit for your car! Package Contents Your Kit Will contain: -4x Ultra Bright Footwell Panels -Car Specific front and rear wiring loom! -Car Specific Footwell adapter (If applicable) Specification Your Vehicle MUST have Footwell already for this kit to work If your car is not in our list, please contact us to confirm which kit you require. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£43.20£36.00
#Enhanced Edition Independent Chaser Grille Light Kit
All the colours of the rainbow - at once! Description You've seen our chaser halos, but what about our chaser grilles? This fully independent and self serving kit allows you to install an LED strip behind your grille and use your phone to choose from any colour you want - or several at the same time. Fully plug and play and easily installed this kit has a far superior output to any other grille light kit, Providing both stylish looks and excellent performance. Whats in the Kit? 1x Bluetooth Receiver 1x Power wiring loom with inline 3amp fuse 2 LED Strips (60cm per strip) 1x Fitting Kit Instructions Fitting The kit is very easily installed, taking power from your car battery and fully controlled by your mobile phone. The LED strip is provided with an amount of self adhesive clips which can be used to place your LED strip behind the grille, alternatively you can use a form of adhesive to secure in place, EG Tiger Seal (Not provided) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£72.00£55.00
#Enhanced Edition LED H8/11 Fog Unit V2
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V2 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade Good to Know High Lumen OutputImproved visibility in the eveningsReduced strain on the eyes Technical Info Voltage: 12vWattage: 50WLumens: 16,000 (8000 Per Bulb) Whats in the Box 2x H8/11 LED Units Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. Fitting Video
£53.99£44.99
#Enhanced Edition LED H8/11 Fog Unit V3
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£45.00
#Enhanced Edition RGB Fog Lights - Bluetooth Controlled
Description Our Brand new RGB Fog Light kit is now available! This kit will fit in any vehicle that takes H8 or H11 fog lights Connected direct to the battery this kit can be used when the car is both switched on and off, making it perfect for show use as well as day time driving. Low voltage and low power consumption makes this kit perfect for any vehicle! Good to know 144 Different Solid Colours 8 different feature modes, giving upto 75 different settings/features. Low Power Consumption H8 and H11 fitment Plug and play - takes minutes to fit How do they work? The bluetooth module connects direct to your battery giving it constant power and allowing you to use the fogs whenever you want by simply switching them on via your smart phone. Simply download our app and control the various settings with the touch of a button, Features include Pre Set mode (20 pre set modes programmed into the app such as colour fade) Camera Mode - Take a photo of a colour the light will instantly go that colour DJ Mode - Dance to music saved on your phone Voice mode - reacts to the sound of your voice Single colour mode - choose from over 144 different solid colours. and more many more Whats in the box? 2x H8/11 RGB Fog Light Bulbs 1x Bluetooth Module (Fuse protected) 1x Wiring Loom 1x Fitting Kit Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. Video
£93.60£78.00
#Enhanced Illuminated Door Sill Protectors - Ford Performance Edition
Enhance the entrance of your vehicle with this fantastic product from CEUK We give you the #Enhanced illuminated door sill protectors - Ford Performance Edition All new Black Brushed stainless steel design for better durability and a massive improvement on quality! Whats in the kit? (Wired - Pictured) 2x illuminated door sill protectors 2x 36smd footwell panel replcements 2x wiring looms Whats in the kit? (Wireless - Does not have 2 lines either side of ford performance) 2x illuminated door sill protectors 2x CR2032 Batteries Fitting Kit Please Note: On Wired System The footwell panel colour will be White. If you wish to change this colour to another, Please contact us via email support@ceuk.org If you order the dual colour plates you will receive WHITE panels Sizing: Wired: 54cm long x 5cm deep x 1cm tall Wireless: 47cm long x 5cm deep x 1cm tall How does it work? (Wired) Simply unplug your existing footwell bulb (or LED if MK3 focus) from the holder, Take the wiring loom from the CEUK kit and insert as you would a bulb. The wiring loom has a 2 way splitter, one way incorporates an adapter for the 36SMD footwell panel, the other going to a plug for the Kick plate. Once plugged in, Remove the adhesive backing on both the kick plate and footwell panel and secure in the desired location. A simple yet efficient plug and play system taking 3 minutes per side to install! Why CEUK? Our aim is and has always been to bring you the best possible products to #Enhance your vehicle, and this is another step in the right direction! Modify your ride the #Enhanced way! Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£123.58£102.98
#Enhanced Illuminated Door Sill Protectors - RS Spec
RED WILL BE DISCONTINUED ONCE REMAINING STOCK HAS SOLD - PLEASE NOTE DISCONTINUED STOCK WILL BE OLD DESIGN (3 LINES) - NONE DISCONTINUED STOCK IS NEW STAINLESS STEEL DESIGN WITH 2 LINES #Enhance the entrance of your vehicle with this fantastic product! All new Black Brushed stainless steel design for better durability and a massive improvement on quality! We give you, The #Enhanced Illuminated Sill Protectors - RS Spec In a stunning ultra bright LED Blue. you can truly give your Car not only what it deserves, But the one thing it is missing! What's in the kit? 2x Illuminated Door Sill Protectors with specified design 2x 36SMD Ultra Bright BriteVue Footwell Panels 2x 2 Way Wiring Loom (Footwell/Kick plate adapter) Please Note: The footwell panel colour will be the same as the kick plate you choose! If you wish to change this colour to another, Please contact us via email support@ceuk.org Simply unplug your existing footwell bulb (or LED if MK3 focus) from the holder, Take the wiring loom from the CEUK kit and insert as you would a bulb. The wiring loom has a 2 way splitter, one way incorporates an adapter for the 36SMD footwell panel, the other going to a plug for the Kick plate. Once plugged in, Remove the adhesive backing on both the kick plate and footwell panel and secure in the desired location. A simple yet efficient plug and play system taking 3 minutes per side to install! Sizing: Wired: 54cm long x 5cm deep x 1cm tall Why CEUK? Our aim is and has always been to bring you the best possible products to #Enhance your vehicle, and this is another step in the right direction! Modify your ride the #Enhanced way! Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£50.00 - £85.00
33 Piece Multi Tool Utility Kit
Multi Utility Tool Kit - 33pc Our Utility Tool Kit is an ideal glove box companion, with a handy 1/4" Flat Ratchet with both a Bit Connector (18 bits supplied) and a Socket Conector (7 sockets supplied with adapter) Ontop of this, a handy set of micro screwdrivers are stored safely in a mini cas
£24.00£20.00
3SDM 3SDM 0.01 18"x8.5" 5x108 ET45 in Silver / Cut
This Silver / Cut 3SDM 0.01 Wheel comes in a 18" by 8.5" size with a PCD of 5x108 and an offset of 45mmThe 18"x8.5" 0.01 Features a per wheel load raiting of 675kgNOTE: The images provided are generic images for this series of wheel and do not depict a specific size or ofset. All sets of 3DSM Cast wheels come with a free fitting kit of nuts/bolts and spigot rings.Please ensure your Make/Model and year are provided accurately to ensure we can identify the correct thread and centre bore.
£966.00
3SDM 3SDM 0.01 18"x8.5" 5x112 ET45
This Silver / Cut 3SDM 0.01 Wheel comes in a 18" by 8.5" size with a PCD of 5x108 and an offset of 45mmThe 18"x8.5" 0.01 Features a per wheel load raiting of 675kgNOTE: The images provided are generic images for this series of wheel and do not depict a specific size or ofset. All sets of 3DSM Cast wheels come with a free fitting kit of nuts/bolts and spigot rings.Please ensure your Make/Model and year are provided accurately to ensure we can identify the correct thread and centre bore.
£966.00
![Ford Focus MK1](http://www.carenhancementsuk.co.uk/cdn/shop/collections/comingsdoon_c80f0b9d-738b-4a70-8cc8-c2d31031fec1.png?v=1486402302&width=640)