Latest Products

A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo. The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium with a machined connector to fit the original fitting and is finished in powder coated black with a laser-cut plaque. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black finish Includes all fixtures and fittings Features detailed fitting guide Fitment: BMW 1 Series – F52 – (10/2015 to 12/2019) BMW 1 Series – F44 Gran Coupé – (10/2018 to 12/2019) BMW 1 Series – F45 Active Tourer – (11/2013 to 04/2018) BMW 1 Series – F45 Active Tourer LCI – (05/2017 to 12/2019) BMW 1 Series – F46 Gran Tourer – (07/2014 to 03/2018) BMW 1 Series – F46 Gran Tourer LCI – (05/2017 to 12/2019) BMW X1 – F48 – (11/2014 to  06/2019) BMW X1 – F48 LCI – (05/2018 to 01/2020) BMW X1 – F49 – (11/2014 to 08/2019) BMW X1 – F49 LCI – (05/2018 to 12/2019) BMW X2 – F39 – (10/2016 to 12/2019) MINI F56 – (04/2013 to 12/2019) MINI F55 – (09/2013 to 12/2019) MINI Clubman F54 – (11/2014 to 07/2019) MINI Clubman F54 LCI – (05/2018 to 12/2019) MINI Cabriolet F57 – (11/2014 to 12/2019) MINI Countryman F60 – (11/2015 to 01/2020)  Only in Pro-Series Black, silver for photo purposes only.  AIRTEC part no: ATMSMINI15

Read more less

This 2.5″ big boost pipe kit is a must for a remapped RS, everything you need is included in the kit Features: 2.5″ light-weight alloy hard pipes connected with Pro Hoses 5 ply silicone hoses Available in Pro-Series Black or Motorsport Silver pipework Will fit with the following intercoolers: AIRTEC Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5″ hard pipe upgrade removes Ford’s 2.0″ restrictive boost pipes and is ‘bolt on power’ This kit is designed for BIG BHP / Remapped Focus RS’s. All pipes have swaged ends to stop the pipes blowing off on higher power cars. Fitting takes 1 – 2 hours. Registered Design Right number: 6022646 AIRTEC part no: ATMSFO81

Read more less

This is an aluminium intake pipe is designed to fit Audi, Seat, Skoda & VW with the 2.0 TSI/TFSI EA888 engines. Features 80mm Intake Diameter Will work  with standard air box or our induction kit (JSK-123) Improves performance and throttle response Enhanced induction and turbo sound What Does It Do? This performance intake pipe allows for improved air flow and sound over the standard restrictive factory equipment. Paired with our performance induction kit JSK-123 you will see even more positive performance gains. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated aluminium pipe Black silicone coupler If you have any queries on this product fitment then please contact us via 01793 296 344 or on our live chat and one of our brand associates will be more than happy to assist.

Read more less

You asked and we listened – AIRTEC Motorsport is proud to launch our RS-style crossover pipe for the Mk2 Focus ST 225, suitable for track or fast road use. The challengeWe’re always eager to develop parts and products that cater for our customer’s needs and with interest shown to produce an RS-style intake pipe that crosses over the top of the engine instead of working around it to reduce restriction and improve sound, response as well as under bonnet looks. The solutionDesigned to exclusively to fit the ST model but in a similar style to our incredibly popular Mk2 Focus RS enlarged crossover pipe, this direct replacement pipe offers a shorter and simpler path from the air filter to the turbo inlet. Where as the original ST intake pipework deviates from 80mm down to 70mm through a series of bends, including a harsh 90-degree turn, our RS-style pipe measures 76mm throughout the entire length and removes the restrictive 90-degree bend. It also allows the fitment of our huge Focus RS Group A filter; which is the largest filter we offer, whilst retaining the original MAF sensor, so there is no need to adjust the ECU calibration. Made from high quality aluminium, it is offered in either Motorsport brushed silver or powder coated black finishes and features a laser cut AIRTEC Motorsport plaque. The comprehensive kit also includes a Pro Hoses silicone connector and all fixtures and fittings, which makes installation a simple task. Available with optional vacuum pipe (highly recommended) that reroutes to suit the new intake pipe layout correctly.  Specification: Increase in overall internal diameter Removes restrictive 90-degree bend Improves response and sound RS-style improved appearance Direct replacement fitment Made from high quality aluminium Retains original MAF sensor Optional rerouted vacuum line Available in Motorsport brushed silver or powder coated black finishes Includes all fixtures and fittings Features detailed fitting guide

Read more less

As part of our expanding Fiesta ST180 product range, AIRTEC Motorsport are proud to launch our RS-style 76mm top induction pipe suitable for track or fast road use. Inspired by the design of our Focus RS top induction pipe, we’ve created a large, free flowing pipe that joins the turbo inlet to the intake with a substantial increase in overall internal volume to reduce restriction and improve flow. A direct replacement part for the ST180, it offers increases in performance and response, as well as sound and aesthetics. Made from high quality aluminium for an improved look and feel, the pipe maintains a constant 76mm internal diameter throughout, compared to the 70mm standard item, and features a design with less bends and restrictions. It also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The comprehensive package includes Pro Hoses silicone connectors and fixtures and fittings, which makes installation a simple task. There is also the option to add an AIRTEC Motorsport induction kit, featuring an aluminium intake pipe with billet MAF sensor boss, laser cut shield and a choice of a cotton of foam air filter. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars. Features: Comprehensive kit designed specially for the ST180 platform Optional induction kit with laser cut shield and cotton or foam filter Improved soundtrack and under bonnet aesthetics Huge improvement to turbo air flow Made from lightweight aluminium Long lasting, high quality black powder coat finish AIRTEC Motorsport plaque Includes all fixtures and fittings AIRTEC Part No: ATMSFO131

Read more less

A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. TECHNICAL DATA As part of our expanding Fiesta ST Mk8 product range, AIRTEC Motorsport are proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer and connects to the standard air box or to an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification. Specification: Suitable for Fiesta Mk8 ST Direct replacement part Improves air flow to the turbo Made from high quality alloy Powder-coated black finish AIRTEC Motorsport plaque Includes all fixtures and fittings Features detailed fitting guide   AIRTEC Part No: ATMSFO124

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our big boost pipe kit upgrade suitable for track or fast road use. AIRTEC Part No: ATMSYGR06 TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our big boost pipe kit upgrade suitable for track or fast road use. A direct replacement kit that offers increases in performance and response, the enlarged boost pipe kit features a freer-flowing design with a increased internal diameter on both the hot side and cold side. Cold SideOur comprehensive eight-piece kit begins with a gentle taper from the 40mm turbo outlet that increases by 25% to reach 50mm as it meets the AIRTEC Motorsport intercooler inlet side. Hot SideFrom the intercooler’s 60mm outlet side, the pipework tapers back down to meet the throttle body’s 49.5mm size, maintaining a 53mm minimum as it reaches the new cast alloy throttle body elbow. In doing so, it offers up to a 39% increase in internal diameter during the most restrictive part of the OEM pipework (38mm) just before the throttle body elbow. This increased overall internal volume and improved design works to reduce restriction and improve flow from the turbo and to the inlet, providing an increase in power and response. Made from high quality aluminium, the kit includes a revised throttle body elbow, a series of high-quality silicone connectors and all pipework is finished in powder-coated black for a subtle OEM+ look. The installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged boost pipe kit is an essential modification. Specification: Up to 39% increase in bore size Larger and freer-flowing design Comprehensive eight-piece kit Improves flow from the turbo to the inlet Increases mid-range performance Direct replacement fitment Made from high quality alloy Powder-coated black finish Includes all fixtures and fittings Features detailed fitting guide Please note: Will not fit OEM intercooler – designed only for use with AIRTEC Motorsport intercooler upgrade.  AIRTEC Part No: ATMSYGR06

Read more less

AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK8 Type R A direct replacement part that offers increases in performance and response as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. AIRTEC part no: ATMSFK803 TECHNICAL DATA AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK2 & FK8 Type R. As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality cast aluminium for a factory look and feel, the larger pipe also features a cast AIRTEC logo in silver and powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer to use with a standard air box as well as a straight silicone connector to use with an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation kit includes all fixtures and fittings and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification.   Dimensions: Civic OEM induction pipe IN: 62mm OUT: 59mm AIRTEC Motorsport induction pipe IN: 72mm OUT: 60mm   Specification: Direct replacement part Made from high quality cast alloy AIRTEC cast logo in silver Powder-coated black finish Improves air flow to the turbo Increases mid-range performance Includes all fixtures and fittings Features detailed fitting guide Fits both, FK2 & FK8 Civic Type R. Registered Design Right: 6154867 AIRTEC part no: ATMSFK803

Read more less

NOW IN STOCK The all new Stage 3 ready Crossover Pipe from our sister company Enhanced Performance is here! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power! Will fit with any other brand of silicone / primary hose including RamAir & Pro Alloy

Read more less

NOW IN STOCK The all new Stage 3 ready Intake kit from our sister company Enhanced Performance is here! Replacing the entire system from the Airbox to the turbo, this kit is designed to maximise power! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 1x Silicone Primary Hose (Blue, Red or black) 1x Enhanced Performance Intake Cage 1x Enhanced Performance Sensor Tube 1x Enhanced Performance Filter (Pro Cotton, Foam or Standard Cotton) 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power!

Read more less

As part of our development programme for the latest Mk4 Focus ST model , we’re proud to release our larger top induction pipe upgrade. TECHNICAL DATA AIRTEC Motorsport Top Induction Pipe for Focus ST MK4 As part of our development programme for the latest Mk4 Focus ST model , we’re proud to release our larger top induction pipe upgrade. A direct replacement for the original item, our lightweight, two-piece alloy pipework features a larger internal diameter to help increase air flow passing through. It connects using three high-quality Pro Hoses silicone joiners and comes in a powder coated black finish. A great upgrade for any modified Mk4 ST, the comprehensive kit also includes all fixtures and fittings, including a detailed fitting guide. AIRTEC part no: ATMSFO122

Read more less

Everything you need for the power you crave. The Performance Pack includes Software, Intake System, Intercooler and Intercooler Pipes.   EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedDiameter DirectFlow PerformanceDesigned Learn more about this product PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More     INTERCOOLER PIPE UPGRADE As well as the Intercooler, the Revo Performance Pack also includes the Intercooler pipe upgrade.  It reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals Learn more about this product INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER200PS TORQUE320NM POWER262PS TORQUE395NM Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Ford Puma ST 1.5 EcoBoost 2019 > Images shown are for illustration purposes only All Revo Software availability is ECU ID Dependant. Upgrade pricing for existing Revo Stage 1 ECU customers.  Terms and Conditions apply.  Performance data is taken from 2020 Ford Puma ST. Additional SPS Software Switch purchase required for some software features.  Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer

Read more less