Performance - BMW 1 Series F40

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the downpipe to the centre section. This exhaust makes the system louder as it removes the GPF filter and therefore, offers a significantly sportier exhaust note. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Fitment will require basic engine tuning at time of fitment to cancel the EML light. When fitted to a Cobra Performance Exhaust, the SLJ supplied is not required for fitment. Fitment is for motorsport and off road use only. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Our sports exhausts range is fully guaranteed to give you assurance of our quality. These BMW 128ti (F40) performance exhausts are made in 3" (76.2mm) pipework and fit from the Gasoline Particulate Filter section backwards (GPF-back) this exhaust replaces the centre and rear sections. All relevant fittings and gaskets are supplied. This exhaust offers improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust has a choice of 4" (101.6mm) tailpipe options including a choice of carbon fibre tip options. GPF Back with Rear Box Test Results: Sound - Engine at Idle: 68dB (+10.7dB) - Static 4,000rpm test: 86.4dB (+4.8dB) Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind.

Read more less

Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 128ti performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) replacing the centre and rear sections. GPF Back with Box Delete Test Results: Sound - Engine at Idle: 70dB (+12.7dB) - Static 4,000rpm test: 91dB (+8.5dB) All relevant fittings and gaskets are supplied. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 128ti performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the PPF section. The sports cat exhaust option will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. All relevant fittings and gaskets are supplied for fitment. Fitment will require basic engine tuning at time of fitment to cancel the EML light. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) replacing the centre and rear sections. GPF Back with Box Delete Test Results: Sound - Engine at Idle: 73.5dB (+10.5dB) - Static 3,800rpm test: 95.1dB (+13.1dB) All relevant fittings and gaskets are supplied. This exhaust offers a significant improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust has a choice of 4" (101.6mm) tailpipe options including a choice of carbon fibre tip options. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Our sports exhausts range is fully guaranteed to give you assurance of our quality. These BMW M135i (F40) performance exhausts are made in 3" (76.2mm) pipework and fit from the Gasoline Particulate Filter section backwards (GPF-back) this exhaust replaces the centre and rear sections. All relevant fittings and gaskets are supplied. This exhaust offers improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust system has been designed to be easily upgradable to a full turbo-back exhaust in the future by purchasing additional sections. This exhaust has a choice of 4" (101.6mm) and 4.5" (114.5mm) tailpipe options including a choice of carbon fibre tip options. GPF Back with Rear Box Test Results: Sound - Engine at Idle: 72.3dB (+9.3dB) - Static 3,800rpm test: 87.2dB (+5.2dB) Weight - 10.4kg (-7.4kg) Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) replacing the centre and rear sections. GPF Back with Box Delete Test Results: Sound - Engine at Idle: 73.5dB (+10.5dB) - Static 3,800rpm test: 95.1dB (+13.1dB) All relevant fittings and gaskets are supplied. This exhaust offers a significant improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust has a choice of 4" (101.6mm) tailpipe options including a choice of carbon fibre tip options. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fit from the turbo backwards (turbo-back system), these parts replace the front pipe, centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. IMPORTANT: this exhaust removes the PPF filter and will require engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as this system removes the PPF filter. Fitted images show the non-valved resonated version. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Scorpion Exhausts - GPF Delete BMW M135i F40 GPF delete Removes OE GPF Fitment Years: 2020 - 2022 Model: M135i xDrive (F40) GPF model Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75"            BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others. Scorpion are proud to offer a range of premium systems for the BMW M135i F40. Available for the application is a T304 stainless steel 70mm high flow GPF back exhaust system with valve plate for OE valved option. The GPF back system has been designed with a high flow profile and an acoustic rear silencer to eliminate drone. For drivers wanting a louder sportier tone we offer a GPF Delete option and for those wanting to go even further with modifications a Turbo downpipe (Sports catalyst and De-cat) option is available. We pride ourselves in allowing users to personalise their cars to their preferences. For that we offer an extensive range of exhaust tips for the M135i System. Drivers can select from 114mm Carbon Ascari, Polished Daytona, Black ceramic Daytona, Polished Indy or Black Ceramic Indy tailpipes.             TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.         Technical information for SBMP083 Product Type GPF Delete Fitment Years 2020 - 2022 Fits To OEM / Scorpion Model Fitment M135i xDrive (F40) GPF model Pipe Diameter 70mm/2.75" * Shipping Dimensions 102cm x 42cm x 33cm Closed Circuit Product Yes OEM Scorpion Change Weight Difference 6.5 KG 4.15 KG -2.35 KG

Read more less

Scorpion Exhausts - BMW M135i F40 Downpipe (Sports or Decat) Downpipe with a high flow sports catalyst Replaces OE catalyst with a high flow sports catalyst Fitment Years: 2020 - 2022 Model: M135i xDrive (F40) GPF model Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75" De-cat downpipe Removes OE catalyst Fitment Years: 2020 - 2022 Model: M135i xDrive (F40) GPF model Fits To: OEM / Scorpion       BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others. Scorpion are proud to offer a range of premium systems for the BMW M135i F40. Available for the application is a T304 stainless steel 70mm high flow GPF back exhaust system with valve plate for OE valved option. The GPF back system has been designed with a high flow profile and an acoustic rear silencer to eliminate drone. For drivers wanting a louder sportier tone we offer a GPF Delete option and for those wanting to go even further with modifications a Turbo downpipe (Sports catalyst and De-cat) option is available. We pride ourselves in allowing users to personalise their cars to their preferences. For that we offer an extensive range of exhaust tips for the M135i System. Drivers can select from 114mm Carbon Ascari, Polished Daytona, Black ceramic Daytona, Polished Indy or Black Ceramic Indy tailpipes.         TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.     Product Type Turbo-Downpipe Fitment Years 2020 - 2022 Fits To OEM / Scorpion Model Fitment M135i xDrive (F40) GPF model Pipe Diameter 70mm/2.75" * Shipping Dimensions 58cm x 33cm x 16cm OEM Scorpion Change Weight Difference 4.8 KG 4.2 KG -0.6 KG

Read more less

Scorpion Exhausts - BMW M135i F40 GPF Back Exhaust Valve requires OE Motor. Original system requires cutting unless fitting with SBMP083 Fitment Years: 2020 - 2022 Model: M135i xDrive (F40) GPF model Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75"     BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others. Scorpion are proud to offer a range of premium systems for the BMW M135i F40. Available for the application is a T304 stainless steel 70mm high flow GPF back exhaust system with valve plate for OE valved option. The GPF back system has been designed with a high flow profile and an acoustic rear silencer to eliminate drone. For drivers wanting a louder sportier tone we offer a GPF Delete option and for those wanting to go even further with modifications a Turbo downpipe (Sports catalyst and De-cat) option is available. We pride ourselves in allowing users to personalise their cars to their preferences. For that we offer an extensive range of exhaust tips for the M135i System. Drivers can select from 114mm Carbon Ascari, Polished Daytona, Black ceramic Daytona, Polished Indy or Black Ceramic Indy tailpipes.        TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.       Technical information for SBM083C Product Type GPF-Back Valve Yes Fitment Years 2020 - 2022 Fits To OEM / Scorpion Model Fitment M135i xDrive (F40) GPF model Pipe Diameter 70mm/2.75" * Tailpipe Daytona Tailpipe Diameter 114mm Shipping Dimensions 101cm x 62cm x 35cm Notes Original system requires cutting unless fitting with SBMP083 OEM Scorpion Change Power Difference 280.9 BHP 284.8 BHP +3.9BHP Weight Difference 16.9 KG 11.9 KG -5 KG

Read more less

Scorpion Exhausts - GPF Delete BMW 1 Series F40 128ti Removes OE GPF. Fits to O.E.M and Scorpion Fitment Years: 2021 - 2022 Model: 128ti F40 Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75"        BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others.           TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.              Technical information for SBMP085 Product Type GPF Delete Fitment Years 2021 - 2022 Fits To OEM / Scorpion Model Fitment 128ti F40 Pipe Diameter 70mm/2.75" * Shipping Dimensions 120cm x 32cm x 32cm Closed Circuit Product Yes OEM Scorpion Change Weight Difference 9.41 KG 2.95 KG -6.46 KG

Read more less