Performance - Audi S3 (8V) WITH Gpf

UNIVERSAL EXHAUST MOUNT X1 To Fit Golf R EXH023 OEM Part Number: 712770470 OEM Part Number: 1H0253147B OEM Part Number: 255047, 1756516020, 1H0253147C, 20650D0101   FITS: AUDI A1/S1 8X AUDI A3/S3 8L AUDI A3/S3 8V AUDI TT MK1 8N SEAT IBIZA MK2 SEAT IBIZA MK3 6L SEAT LEON MK1 SKODA FABIA MK1 SKODA FABIA MK2 1Z SKODA OCTAVIA MK1 SKODA OCTAVIA MK2 1Z VW POLO MK4 9N VW POLO MK5 6R/6C PO T-ROC VW UP! VW GOLF MK4 VW GOLF MK7 TOYOTA YARIS GR4

Read more less

Racingline Adjustable Rear Droplinks MQB/MQB Evo – VWR520000 Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier. Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. Vehicle FItment – VW Golf Mk8 2020+– VW Golf Mk7 & Mk77.5 2013-2020– VW Passat B8 2015+– VW Arteon 2017+– VW T-Roc 2017+– VW Tiguan II 2016+– Audi S3 8Y 2020+– Audi A3 8Y 2020+– Audi S3 8V 2013-2020– Audi A3 8V 2013-2020– Audi RS3 2.5 TSI 8V 2017-2020– Audi TT 3 8S 2014+– Audi TTRS 8S 2017+– Audi SQ2 2018+– Audi RSQ3 F3 2019+– Audi Q3 2019+– Audi Q2 2017+– Cupra Leon IV FW 2020+– SEAT Leon III 5F 2015-2020– Cupra Ateca 2018+– Cupra Formentor 2020+– SEAT Tarraco 2018+– Skoda Octavia IV NX 2020+– Skoda Octavia III 5E 2014-2020– Skoda Superb III 3V 2015+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR520000

Read more less

Racingline MQB Subframe Alignment Kit The RacingLine Alignment Bolt Collar kit is a simple ‘why not’ upgrade to eliminate the challenges caused by large tolerances in the factory subframe mounts, both front and rear. The OEM subframe design uses really oversized bolt holes – giving a wide range of adjustments to shuffle the whole subframe assembly back and forth, side to side. Whilst that may be ideal for dealers & repairers to lazily mask other misalignment in the chassis, it means that there are also huge opportunities for inaccuracy every time your subframes are refitted, not to mention the risk of the car’s alignment creeping out of tolerance with hard driving over time. Our precision-engineered, push-in Bolt Collars centralise the subframes by cutting out the huge hole tolerances, so perfectly centring the bolt locations every time you refit. The result? With correct alignment, you’ll keep precise steering, sharper handling and braking responses every time. By ensuring complete accuracy every time you refit your subframes, you’ll save time and cost by ensuring consistent, hassle-free alignment each time, every time.  With no need for alignments after refitting subframes in future, this really affordable upgrade will likely pay for itself many times over.No additional NVH transfer into the car and no more creaking mounts. Full kit of 16x Bolt Collars for front and rear subframes High quality T6061 billet aluminium construction CNC construction, anodised gloss black to last Precision machining means tighter alignment specs Simple, quick push-in fitment into OEM subframes No modification to subframe or car body is required, so fitment is completely reversible. Confirmed Applications VW Golf 7 2012+ 5G VW Golf 7 GTI 2013+ 5G VW Golf 7 R 2013+ 5G VW Golf 7 GTI ClubSport 2016+ 5 VW Passat 2.0 TSI B8 2015+ 3G Audi A3 2012+ 8V Audi S3 2013+ 8V Audi TT III 2014+ 8S Audi TT 2.0 TSI III 2014+ 8S Audi TTS III 2015+ 8S SEAT Leon III 2012+ 5F SEAT Leon Cupra III 2014+ 5F Skoda Octavia III 2013+ 5E Skoda Octavia vRS III 2014+ 5E Skoda Superb 1.8 / 2.0 TSI 2015+ B8 3V Fitting Installation is straightforward and can be performed in approximately one hour. We recommend replacing the original subframe bolts with new ones – as stretch bolts they are intended for one-time use only. It’s critical to perform a full wheel/geometry alignment by a professional after fitment. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR150000

Read more less

WHY CHOOSE THE K-BRACE?   > The main role of bracing is to increase rigidity and stability of a vehicle by preventing body roll, therefore improving grip, steering feedback and response. The K-Brace is an adaption of a strut/tower brace, but provides the same solution with significant enhancements. HEIGHTENED PERFORMANCE  > With the 4 fixing points and making use of a triangulation design, the K-brace is able to produce an undoubted amount of support in comparison to that from a singular bar strut brace. UNIQUE DESIGN > Car Manufacturers often use additional strengthening supports to the strut mountings of a standard vehicle. Therefore, by utilising those supports, in conjunction with the design of the K-Brace we are able to reduce the structural flex of the body or chassis especially during cornering. INNOVATIVE SOLUTIONS > The K-Brace will always be mounted in the most optimum position in your vehicle, while taking into consideration usability of the standard car. Rear folding seats remain fully functional, while boot space is optimised without compromising performance. TAILORED PREFERENCE > The industrial standard powder coating we provide is second to none. With 6 colours to choose from we are giving you the option to choose your alternative. AUDI A3/S3/RS3 8V K-BRACE K-Brace can be installed using the Fitting aid Provided. Fits ALL AUDI A3 8V2013 - 2020 Available in Black-White-Grey-Red-Blue-Yellow or Unpainted International delivery available  21 Working Day lead time Quality guaranteed.    Please note;    REQUIRES MODIFICATIONS TO THE CARPET.   THE BRACE WILL LOOK TOO BIG FOR THE CAR UNTIL CARPET HAS BEEN TRIMMED OR REMOVED.  

Read more less

PFF85-833 PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-833P PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-833BLK PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

LOWER ENGINE MOUNT (LARGE) INSERT DIESEL PFF85-832R Some NVH transmission should be expected when fitting this part to a Diesel vehicle. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT TRACK USE PFF85-832P Made in Purple 80A and suitable for higher powered cars and track cars, this part helps to further reduce engine movement over fitting the standard PFF85-832 insert. Increased NVH may be felt when fitted. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832BLK   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)                    

Read more less

FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - ROAD PFF85-831 PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-831P PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-831BLK PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- fits: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

LOWER ENGINE MOUNT INSERT (LARGE) DIESEL PFF85-830R Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) TRACK USE PFF85-830P Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830BLK   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

PLEASE CHECK WHAT SIZE YOU NEED PRIOR TO ORDERING --- FRONT ANTI ROLL BAR BUSH 21.7MM PFF85-803-21.7 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303L / 5Q0 411 303 L OEM Part Number: 5Q0411303P / 5Q0 411 303 P OEM Part Number: 5Q0411303S / 5Q0 411 303 S Size 21.7mm --- FRONT ANTI ROLL BAR BUSH 21.7MM PFF85-803-21.7BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303L / 5Q0 411 303 L OEM Part Number: 5Q0411303P / 5Q0 411 303 P OEM Part Number: 5Q0411303S / 5Q0 411 303 S Size 21.7mm --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam --- FRONT ANTI ROLL BAR BUSH 23.2MM PFF85-803-23.2 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303M / 5Q0 411 303 M OEM Part Number: 5Q0411303T / 5Q0 411 303 T OEM Part Number: 5Q0411303Q / 5Q0 411 303 Q Size 23.2mm -- FRONT ANTI ROLL BAR BUSH 23.2MM PFF85-803-23.2BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303M / 5Q0 411 303 M OEM Part Number: 5Q0411303T / 5Q0 411 303 T OEM Part Number: 5Q0411303Q / 5Q0 411 303 Q Size 23.2mm --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam --- FRONT ANTI ROLL BAR BUSH 24MM PFF85-803-24 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303N / 5Q0 411 303 N OEM Part Number: 5Q0411303AA / 5Q0 411 303 AA OEM Part Number: 5Q0411303R / 5Q0 411 303 R Size 24mm --- FRONT ANTI ROLL BAR BUSH 24MM PFF85-803-24BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303N / 5Q0 411 303 N OEM Part Number: 5Q0411303AA / 5Q0 411 303 AA OEM Part Number: 5Q0411303R / 5Q0 411 303 R Size 24mm --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam,  Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Audi TT / TTRS Mk3 FV/8S (2014 on) --- FRONT ANTI ROLL BAR BUSH 25MM PFF85-803-25 Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303AB / 5Q0 411 303 AB Size 25mm --- FRONT ANTI ROLL BAR BUSH 25MM PFF85-803-25BLK Please check anti roll bar diameter before ordering. OEM Part Number: 5Q0411303AB / 5Q0 411 303 AB Size 25mm --- FITS:  Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Seat Tarraco (2018-), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - )  

Read more less

FRONT WISHBONE FRONT BUSH PFF85-501 For a camber adjustable bush use PFF85-501G. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH PFF85-501BLK   OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501G This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501GBLK This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FITS: Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U, Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

DIAGRAM REFERENCE: 21PRODUCT NOTES: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering.BUSH SIZE IF APPLICABLE:NUMBER OF BUSHES IN PACK:1REPLACES OEM BUSH PART NUMBERS:5Q0199855Q//Road SeriesFor Road and fast Road usePOWERFLEX Road Series bushes improve your cars road holding and chassis performance by controlling the amount of unwanted flex in the suspension. They offer Prolonged tyre life, Improved performance, Increased safety, Greater cost-effectiveness.   Fits: Audi S3 (8V) Audi A3 (8V 12-20))  

Read more less