Performance - Audi RS4 B9

Racingline Oil Filter Housing Audi (B9) S4, S5, RS4, RS5, SQ5 – VWR190001 Tired of staring at your cheap, brittle plastic oil filter housing every time you lift your bonnet? Us too, and that’s why we’ve come up with our beautiful billet Oil Filter Housing to replace it. It’s made to match OEM dimensions right down to the original factory size hex nut. The Filter Housing accepts the factory engine oil filter to maintain simplicity and keep that OEM fitment for your future oil changes. A quality part means you can forget about the problems of cracked plastic housings forevermore. Applications Audi S4 (B9) 3.0 V6 TFSI 2017+ Audi S5 (B9) 3.0 V6 TFSI 2017+ Audi RS4 (B9) 2.9 V6 TFSI 2018+ Audi RS5 (B9) 2.9 V6 TFSI 2018+ Audi SQ5 (B9) 3.0 V6 TFSI 2018+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR190001

Read more less

Racingline Carbon Fibre Air Intake System RS4/RS5 (B9) 2.9 V6 TFSI Our latest Cold-Air Intake System kit for the current ‘B9’ Audi S4, RS4 and S5, RS5 enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains. Our High-Flow TriFoam™ triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved Each filter is handmade in the UK The intake uses a clever design which retains the original Audi lower box of the intake, adding in a replacement lid, TriFoam™ filter and front intake scoop By reducing turbo spool by up to 500rpm in some cases through the enhanced efficiency of the system, lightning fast turbo response is guaranteed.  In our experience, no other intake kit gives higher gains It’s not just about performance; the beautiful carbon weave of the intake will enhance your engine bay every time you lift the bonnet! How does it sound? You’ll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. Confirmed Applications Audi RS4 (B9) 2.9 V6 TFSI 2018+ Audi RS5 (B9) 2.9 V6 TFSI 2018+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR1241RS4

Read more less

This front mounting intercooler kit has been designed as an upgrade for the Audi S4 B9 and fits the Audi A4 B9. Offering a huge 128% increase in frontal area and matching increase in internal volume the Forge intercooler is a must have for anyone tuning new twin-entry single turbo 3.0 V6 328bhp engine fitted to the latest in the line of high performance S4 Audi's. Utilising a race specification Forge Alsus* designed Bar & Plate construction and hand fabricated sheetmetal endtanks crafted at our fabrication facility in Gloucester, UK. The core measures 650 x 420 x 50mm. 128% increase in frontal area. 128% increase in volume. Black powdercoated finish. Supplied with high quality silcone hose, hose clamps, and fixings required for the installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Spoiler CAP Audi RS4 B9 Avant FITS ONLY:Audi RS4 B9 Avant (2017-) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting Manual Fitting manuals: SPOILER EXTENSION INSTALLATION MANUAL CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided

Read more less

Rear Valance Audi RS4 B9 Avant FITS ONLY:Audi RS4 B9 Avant (2017-) COMPLETE SET CONTAINS: - Rear Diffuser This product is an add-on to the original diffuser. We recommend using a strong adhesive to secure fitment, such as tiger sealant. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Rear Side Splitters Audi RS4 B9 Avant FITS ONLY:Audi RS4 B9 Avant (2017-) COMPLETE SET CONTAINS:-> Rear Side Splitters (Left + Right)-> Fitting kit-> Fitting manualFitting manuals: REAR SIDE SPLITTERS INSTALLATION MANUAL CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided

Read more less

Side Skirts Diffusers Audi RS4 B9 FITS ONLY:Audi RS4 B9 (2017-) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting Manual Fitting manual: SIDE SKIRT DIFFUSERS INSTALLATION MANUAL CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided

Read more less

FRONT SPLITTER V.2 AUDI RS4 B9 (2017-UP) fits: AUDI RS4 B9 (2017-UP)   COMPLETE SET CONTAINS:  SPLITTER /FRONT BUMPER LIP SPOILER  Mounting kit   Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

FRONT SPLITTER V.1 AUDI RS4 B9 (2017-UP) fits: AUDI RS4 B9 (2017-UP)   COMPLETE SET CONTAINS:    SPLITTER /FRONT BUMPER LIP SPOILER  Mounting kit   Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less