Big Brake Kits

The calipers included in this kit are 4 Piston AP Racing Radical 2. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 stainless steel spring washers. This brake kit is a great way of saving weight from the front axle too compared to the OE 340mm set up found on the Mk7 Golf R, GTI with upgade and Audi S3 8V our kit weighs in at 10.35Kg less: VBT Caliper Carrier - 0.415KgOE Caliper Carrier   - 2.270KgAP Caliper with brake pads - 4.390KgOE Caliper with brake pads - 6.060KgAP/VBT 362x32mm discs - 8.640KgOriginal 340mm discs      - 10.360Kg VBT Fitting Kit & Lines - 0.242KgOE Fitting Kit & Lines   - 0.158Kg Included in our kit: 2x 4 Piston AP Racing Radical 2 calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Set of brake pads to suit your driving style and needsBrake fluid to flush system when installing FITS:  AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TTRS 8J AUDI TT 8S AUDI TTRS 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 1M SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1B VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

Our disc installation kits come with everything you need to install a big brake kit excluding the calipers and pads, allowing you the quality of Vagbremtechnic products with the option to source and supply your own 'bargin' priced new or second-hand  8 Piston Brembo Calipers which can be found from the Audi RS4 B7 / Audi R8 / Lamborghini Gallardo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit: 2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved or Drilled)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x 8 Piston Brembo caliper from Audi RS4 B7 / Audi R8 / Lamborghini Gallardo1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS:  AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TTRS 8J AUDI TT 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

RACE APPLICATION ONLY - NOT FOR ROAD USEThe calipers included in this kit are 6 Piston made by AP Racing. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI S1 8X AUDI A3 8L AUDI S3 8L SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK1 6Y SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This disc installation kit comes with everything you need to install our 1 piece 330x28mm front brake discs. Excluding calipers & pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 1 piece brake discs are 330x28mm from a different vehicle manufacturer which we have modified to allow fitment to your car. We dimple the discs to give it that Porsche turbo look. We also include hub centering rings which reduce the larger center bore of these discs to match VAG hubs to ensure correct fitment. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 330x28 1 piece front brake discs (Dimpled Only)2x Disc mounting screws2x Centre bore reducing rings1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche Boxster calipers (Part No's: 996.351.425 / 996.351.426)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI S1 8X AUDI A3 8L AUDI S3 8L SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This front brake adaption kit allows the fitment of Porsche 996TT Calipers to VAG stock R32 334mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche 996TT calipers (Part No's: 996.351.429 / 996.351.430)2x 334mm front brake discs (Part No's: 8N0615301B / 8N0615302B)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI A3 8L AUDI S1 8X AUDI S3 8L AUDI TT 8N SEAT IBIZA 6J MK4 SEAT IBIZA 6L MK3 SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA 5J MK2 SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This front brake adaption kit allows the fitment of Porsche Boxster Calipers to VAG stock 312mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 stainless spring washers. Included in our kit: 2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche Boxster calipers (Part No's: 986.351.421 / 986.351.422)2x 312mm front brake discs (Part No: 8N0615301A or our own VBT Hooked discs 8N31225-GA)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI A3 8L AUDI S1 8X AUDI S3 8L AUDI TT 8N SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs Fits: AUDI A1 8X AUDI A3 8L AUDI TT 8N SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SKODA FABIA MK1 SKODA FABIA MK2 SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C  

Read more less

WHEEL FITMENT: Whilst we do try to ensure all our brake kits fit behind the majority of wheel types both stock and aftermarket, we make no guarantees that they will. There is a chance you will need wheel spacers to clear our brake kits. Please take the appropriate steps to ensure wheel clearance before final installation. DRILLED DISCS: Drilled discs are intended for light use, if crack form from drilled holes they have been used too hard and this is not something that is covered under warranty. If outright performance is required we strongly recommend grooved or J hooked. FITS: AUDI A1 8X AUDI A3 8L SEAT IBIZA 6J SEAT IBIZA 6L SEAT LEON 1M SKODA FABIA 5J SKODA FABIA 6Y SKODA FABIA NJ SKODA OCTAVIA 1U VW BORA 1J VW GOLF MK4 VW POLO 6R/6C VW POLO 9N PRICES: - All prices shown exclude and include VAT and are correct at time of publishing and are subject to change without prior notice. - Prices do not include Shipping or Installation fees. VAT: - VAT is charged at the current rate of 20% to customers within the European Union Community. BREXIT 2021 EUROPEAN TAXATION CHANGES: For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order. DISPATCH AND DELIVERY: - Our week day cut off time for same day dispatch on stocked items is 13:00 (GMT/BST). - If you need an item quickly, please contact us by phone on 0044 (0) 161 804 9888 prior to placing the order online to ensure that the item(s) you require is in stock ready to ship, - If you have ordered later than 13:00 (GMT/BST) and are looking for a same day dispatch, this can sometimes be accommodated, but please contact us first so that we can put things in place to achieve this for you. STOCK: - Our website does not display any information regarding an items stock level. Whilst we try to keep plenty of stock of our most popular items, it is not always possible for us to keep one of every option of every product on the shelf ready to ship. - If you need an order by a certain day/date, we strongly recommend you contact a member of our sales team to check the availability of the item(s) you require. - If you are planning to have your items fitted professionally, please wait until you have received and checked your goods before making any workshop or garage appointments. OVERSEAS CUSTOMERS: - We are able to export most of our product range. - If you are situated outside of the European Union Community, UK VAT is not payable. - Depending on delivery destination there may be import taxes/fees, these are your responsibility to pay. - Customers within the EC are charged VAT unless you have a VAT registered business and are able to provide us with a valid VAT number and proof of your business address such as a letterhead or company website. - Due to specific restrictions there are some countries that we can only accept bank transfer payments from.

Read more less

Racingline Stage 2 ‘EVO’ Golf 5/6, Scirocco, Mk2 Cupra Monoblock Performance Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652003-RED) or Black (VWR652003-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 5 GTI 2005-2008> VW Golf 5 R32 2005-2008> VW Golf 5 GTI ED30/Pirelli 2006-2007> VW Golf 6 GTI 2009-2014> VW Golf 6 R 2009-2014> VW Scirocco R 2009-2017> VW Jetta V GLI 2005-2011> VW Jetta VI GLI 2011-2018 > Audi S3 8P 2006-2012> Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012> SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652003

Read more less

Racingline Stage 2 ‘EVO’ Polo (6R/6C), S1 (8X), Ibiza (6J) Monoblock Performance Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652001-RED) or Black (VWR652001-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 330mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Polo Mk5 GTI (6R/6C) 2010-2017 > Audi S1 (8X) 2014+ > SEAT Ibiza (6J) 2015-2018 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652001

Read more less

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652000

Read more less

The Revo Big Brake Kit comes complete with everything required to upgrade your stopping power. With Calipers and discs manufactured by industry leaders Alcon® and a floating system designed by our in-house engineers, each kit includes everything you need in one box; brake lines, brake pads, floating discs, mono-bloc calipers, brackets and even brake fluid.   Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALIPERS Our lightweight six-pot caliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The caliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the calipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITMENT       Manufacturer Model Engine Year Audi A4 (B9) Various  2016 - Present  Audi S4 (B9) 3.0 TFSI  2016 - Present Audi A5 (B9) Various  2017 - Present Audi S5 (B9) 3.0 TFSI  2017 - Present Audi Q5 (FY) Various  2017 - Present Audi SQ5 (FY) 3.0 TFSI  2017 - Present   Notes: Recommended Revo Authorised Dealer Fitment only Please follow the bedding in procedure  Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less